Ptfe Sheet 2mm

virgin ptfe sheet cut to size

• Packaging: carton or wooden case
• Supply Ability: 100000kgs
• Min. Order: 100 Kilogram
• Model No.: CF-F01

virgin ptfe sheet cut to size PTFE has a wide range of practicable temperature from -180°C - +260°C and a wax-like surface to which anything hardly plastics. PTFE has the lowest coefficient of friction of all known solid materials. It has the best electrical properties of all plastics. Other products you may also...

Contact Now

1.2mm thick plastic sheet PTFE sheet

• Packaging: carton or wooden case
• Supply Ability: 100000kgs
• Min. Order: 10 Kilogram
• Model No.: CF-F01

1.2mm thick plastic sheet PTFE sheet Filled PTFE Shee is classified into two types, namely molded sheet and skived sheet. Molded sheet is fabricated by PTFE resin molding and forming under normal temperature, sintering and cooling. Skived sheet is made by PTFE resin pressing, sintering and rotary cutting. Other...

Contact Now

3m ptfe sheet thickness 0.2mm-10mm

• Packaging: carton or wooden case
• Supply Ability: 100000kgs
• Min. Order: 100 Kilogram
• Model No.: CF-F01

Shop for PTFE sheets. Unfilled PTFE sheet, made from virgin PTFE resin, is extremely soft and formable and it is often used for chemical resistant seals and gaskets. Custom cuts and cut-to-size pieces. Have machined into fabricated parts.

Contact Now

ptfe sheet 4mm thickness 0.2mm-10mm ptfe skived sheet

• Packaging: carton or wooden case
• Supply Ability: 100000kgs
• Min. Order: 10 Kilogram
• Model No.: CF-F01

ptfe sheet 4mm thickness 0.2mm-10mm ptfe skived sheet Skived sheet can be made in any thickness from 0.2mm up to 10mm. Fluoro-Plastics technology makes it possible to make in-between sizes. Skived sheet is ideal as a slide surface, for chute liners, other kinds of liners, or for cutting or stamping into gaskets...

Contact Now

ptfe sheet 0.2mm virgin ptfe gasket sheet white

• Packaging: carton or wooden case
• Supply Ability: 100000kgs
• Min. Order: 10 Kilogram
• Model No.: CF-F01

ptfe sheet 0.2mm virgin ptfe gasket sheet white Outstanding dielectric properties. Slippery no-stick surface. Not affected by almost all chemicals and solvents. Excellent UV resistance. Capable of continuous use at 260˚C. Other products you may interested:

Contact Now

ptfe thin sheet thickness 0.2mm

• Packaging: carton or wooden case
• Supply Ability: 100000kgs
• Min. Order: 10 Kilogram
• Model No.: CF-F01

ptfe thin sheet thickness 0.2mm PTFE is a soft, nontoxic fluoropolymer, which is a registered trademark of DuPont) with an extremely low coefficient of friction, meaning that few materials stick to it, and most that do stick can be peeled or rubbed off. PTFE also has outstanding chemical and weathering resistance....

Contact Now

ptfe sheet 12mm ptfe sheet etched

• Packaging: carton or wooden case
• Supply Ability: 100000kgs
• Min. Order: 10 Kilogram
• Model No.: CF-F01

ptfe sheet 12mm ptfe sheet etched Skived vs Moulded PTFE: What’s the Difference? This page lists our range of moulded PTFE. Moulded sheets are usually thicker than those produced by skiving and have a more even, flat surface appearance (both have a consistent thickness). This is the primary difference between the two...

Contact Now

ptfe sheet 0.2mm thick 0.2-10mm

• Packaging: carton or wooden case
• Supply Ability: 100000kgs
• Min. Order: 100 Kilogram
• Model No.: CF-F01

ptfe sheet 0.2mm thick 0.2-10mm Plastic PTFE Plate is classified into two types, namely molded sheet and skived sheet. Molded sheet is fabricated by PTFE resin molding and forming under normal temperature, sintering and cooling. Skived sheet is made by PTFE resin pressing, sintering and rotary cutting. Other products...

Contact Now

ptfe plate thickness 0.2mm-10mm ptfe skived sheet

• Packaging: carton or wooden case
• Supply Ability: 100000kgs
• Min. Order: 100 Kilogram
• Model No.: CF-F01

ptfe plate thickness 0.2mm-10mm ptfe skived sheet CONGFENG stocks a full line of filled and unfilled PTFE basic shapes, including: Virgin PTFE in sheet 25% Glass-Filled PTFE in sheet 25% Carbon-Filled PTFE in sheet A wide array of other fillers and blends are available upon request. Other products you may also...

Contact Now