Abstract : As a new type of filter material, PTFE membrane has the advantages of uniform distribution, high porosity, non-adhesion, durability, fire resistance and high antifouling property. It can filter all dust including bacteria while maintaining air circulation. Particles, in order to achieve the purpose of purification and ventilation.
Key words : PTFE membrane, polytetrafluoroethylene, pharmaceutical industry PTFE membrane, friction coefficient, test PTFE membrane, friction coefficient
Test sample: the pharmaceutical industry-specific PTFE membrane (Jinan special game provided by the customer into the instrument)
Testing equipment : Jinan Saicheng independently developed the MXD-02 friction coefficient meter , which can measure the static friction coefficient at the same time, and the speed and range can be adjusted.
Applicable range of the instrument: plastic films and sheets, textiles, nonwovens, foil, plastic composite film, fiber optic communication cables with composite metallic material, metal, rubber, paper, cardboard, bags, belts, wood, coatings The static friction coefficient and dynamic friction coefficient of materials such as brake pads, wipers, shoe materials, tires, etc. can also be used for the smoothness test of daily chemicals such as cosmetics and eye drops.
Executive standard : GB 10006-1988 "Test method for friction coefficient of plastic film and sheet"
ISO 8295-1986 "Plastic - Films and sheets - Determination of coefficient of friction"
Text : Medical PTFE film can be said to be a material with a low coefficient of friction in solid materials. Due to its special application, the friction coefficient is very strict. Once the friction coefficient is too large, it is likely to affect the performance and quality of the product, causing huge losses to the enterprise. Therefore, in order to avoid the above problems, the scientific and accurate detection of the friction coefficient of the PTFE membrane is an indispensable part of the enterprise before it enters production.
Below, we have completely recorded the entire experimental process, providing a reference for each company to monitor the friction coefficient of PTFE membrane.
Preparation :
- Cut two 60mm x 100mm PTFE membranes in the center according to the sample provided by the customer
- Inspect the surface of the specimen to ensure that it is flat, wrinkle-free, dust-free, fingerprint-free or scratch-resistant and that may affect the coefficient of friction.
- Check the horizontal test rig to ensure smoothness; the slider has a square bottom surface of 40 cm 2 area, and the bottom is covered with felt to avoid the sample from pressing out wrinkles during the experiment, affecting the experimental results.
Experimental process :
- One of the sample surfaces is lifted up and flat on the horizontal test bench, and the two are in parallel directions; the Other sample surface is downward, the slider is wrapped, and the sample is fixed on the front and upper surfaces of the slider with tape.
- Place the slider lightly over the specimen and let it stand for 15 seconds to ensure full contact.
- Set the parameters, start the instrument, pull the slider and the sample through the left force sensor to make the two move relative to each other.
- The first peak displayed by the instrument is the static friction force F s , and the average of the forces within 6 cm of relative movement (excluding static friction) is the dynamic friction force F d .
- The system automatically prints and outputs experimental results, which is convenient for users to analyze.
- Repeat the above experiment to ensure the accuracy of the results.
At present, Jinan Saicheng's self-developed MXD-02 friction coefficient meter has been successfully tested by thousands of customers, no matter its technical and operational perfection, and the system accessories are all imported components, performance. Stable and reliable, it is widely acclaimed and trusted in the market.
As a high-tech enterprise integrating R&D, manufacturing, sales, training and service, Jinan Saicheng has been committed to serving customers all over the world in a comprehensive and multi-angle manner. Its nearly 100 kinds of independent testing instruments can meet all aspects. The different needs of customers, more acceptable non- standard customization , truly solve the problem of detection for customers. For more information on PTFE film tear, tensile strength, impact resistance, thickness, leakage and seal strength, please call Jinan Saicheng Technology directly.
